Pallas Bull
G`d evening gents,
bought me a new second hand airgun last week. My first Bullpup. It was a bargain with a nasty edge. But i thought i was able to undo the edge of its sharp contours. Pallas is said to be some German brand but in reality the Pallas is not mo` or less than Kral Arms from Turkey. Sometime ago i bought the Kral Puncher Pro, it was the worst grouping airgun i`ve ever held in my arms. So why buy another Kral Arms kinda airgun? Well, i don`t exactly know. Think i like working on an airgun. If this one doesn`t do what it oughtta i`m gonna put another barrel in it. But first let`s see what we`ve got. A 12 shot bullpup. https://s6.postimg.org/6z3xv0x81/032.jpg In wich the magazines didn`t fit. https://s6.postimg.org/6mcjoumo1/035.jpg So i used my lathe to remove some .10 mm form the mags. And now they`re functioning again. I`m shooting airguns for quit some years but this is the first time this problem occurs. https://s6.postimg.org/6z3xv4coh/20171214_195022.jpg There are lotsa similarities between the Kral and the Pallas. https://s6.postimg.org/kyevwln69/002.jpg The front end of both guns. https://s6.postimg.org/exh6zj89t/004.jpg .................. |
.................
An elevated Weaver for the scope. https://s6.postimg.org/99aw8nbn5/005.jpg The sidelever. The first mags i saw myself expecting the lever somewhere else than my hand was. https://s6.postimg.org/mrhskgxxt/016.jpg Lotsa parts of the Pallas and the Kral Arms are interchangeable. https://s6.postimg.org/uwzuiojmp/040.jpg Using the longer tube on the Bull? Why not. Shoving the .25 barrel from the Puncher Pro in? No problem. https://s6.postimg.org/apmeqcjkh/043.jpg The next few weeks i`m gona do some grouping. See if it works. Best regards, Roel |
As usual, look forward to reading more about your modifications Sir.
Grumpy |
Hi Dave,
hope you`re doing well. I have contacted Huub from HuMa. De filling valve of the Kral`s are pretty large in diameter, som 1/2" and since we`re shooting with an external regulator a smaller filling valve would be better. The smaller the diameter the easier it opens. With an HuMa regulator the gun will work with a much more stablie pressure and it`ll shoot better groups. I have to find a way to make the valve open easier. If this will work for the .22 Pallas it`ll do the job for the .25 Kral Puncher Pro too i suppose. https://s6.postimg.org/an7l0l481/image.jpg https://s6.postimg.org/bphrj4fbl/image.jpg Best regards, Roel |
Hiya,
took the Pallas to the range yesterday. A few days ago i told that i`m gonna put a HuMa regulator in it. Yesterday there was a guy at the range with a chronometer. I asked if i could use it. I filled the rifle up to 200 bar or 2900 psi and used the 16 grein jsb pellets. 1--840 2--853 3--846 4--856 5--856 6--859 7--859 8--856 9--856 10-859 11-856 12-859 13-869 pressure 2680 14-856 15-863 16-866 17-866 18-869 19-866 20-866 21-866 22-869 23-869 24-873 25-875 pressure 2430 26-873 27-869 28-873 29-869 30-866 31-863 32-866 33-873 34-866 35-873 36-875 37-266 pressure 2175 38-879 39-866 40-856 41-267 42-869 43-873 44-869 45-863 46-853 47-859 48-850 rest pressure 1885 There must be a reg inside this little gun. I was very pleased with the shotstring. https://s6.postimg.org/gvb1oeta9/Pallas_feet.jpg When christmas is over i`ll take the gun apart and see which regulator there is inside. Merry X mas. Best regards. Roel |
WOW, one heck of a string. Congrats sir
|
Hiya Dave,
i took the gun apart a few days ago and guess what....no regulator in it! This gun is ment to be as consistent as this. Some other Dutch guy showed me a shotstring of his Kral Breaker and it was as consistent as mine. I don`t know of any other gun with a shotstring like this one at this powersetting. It`s become my fave plinker i`m dragging this little gun with me everywhere i am shooting. Op to 70 yards i don`t mis any target. It`s a great gun. Best regards. Roel |
All times are GMT +1. The time now is 08:58 PM. |
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2011 Airgunforums.org, All Rights Reserved