Air Gun Forums
Home | About Us | Contact Us
Quick Member Login:
Forgot password?
Forum Sponsors:
Left Advertisement

becomeasponsor
Forum Statistics:
Forum Members:
Total Threads:
Total Posts:


There are users
currently browsing forums.
You don't appear to be registered. Click here to register
Search the forums:
Old 06-30-2013, 10:49 AM   #1
grumpy
Administrator
 
grumpy's Avatar
 
Join Date: May 2010
Posts: 428
Default Good Casting info

Mold Catalogs

http://www.castpics.net/subsite/CurMolds/default.html

http://www.three-peaks.net/bullet_molds.htm

I will be adding more links soon.
grumpy is offline   Reply With Quote
Old 08-29-2014, 01:33 PM   #2
PakProtector
Junior Member
 
Join Date: Mar 2012
Posts: 13
Default

The 'how to' learning curve can look steep. For AG use, it seems a maximum hardness offered by 5% Tin to 95% lead, and at least 2% Tin is a good place to start. The sorting should be carefully done, and attention paid to the tail of the bullet; the release from the barrel is critical. For example, a boolit with a gas check shank is more likely to have the last drive band completely filled, and a rounded edge at the base has no effect on the release...cut off the gas check( for lightening, or shortening ), leaves the base forming a critical part again.

If the mold is pre-heated, the casting defects are much less likely. With .22's it is hard to get the mold up to temperature. Larger boolits warm the mold more quickly. Make sure the stream goes right in the center of the sprue hole. If it runs across the sprue plate the stream cools and defects become more likely. Careful positioning of the mold on a bottom pour pot will take care of this issue.
cheers,
Douglas
PakProtector is offline   Reply With Quote
Old 01-14-2017, 11:55 PM   #3
Badmoets
Member
 
Join Date: Feb 2016
Location: Fryslan, the Netherlands
Posts: 52
Default

Hi,

there`s a guy in the Netherlands i know, he makes solids in different calibres.
http://www.rpsolutions.nl/

The site seems to be in Dutch only, that`s a shame ... i will tell him.

Cheers, Badmoets (Roel)
Badmoets is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:01 AM.
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd. Copyright 2011 Airgunforums.org, All Rights Reserved