Air Gun Forums
Home | About Us | Contact Us
Quick Member Login:
Forgot password?
Forum Sponsors:
Left Advertisement

becomeasponsor
Forum Statistics:
Forum Members:
Total Threads:
Total Posts:


There are users
currently browsing forums.
You don't appear to be registered. Click here to register
Search the forums:

Air Gun Forums » Air gun Alley » Turkish blend » Kral Puncher Pro .25

Reply
 
Thread Tools Display Modes
Old 08-20-2017, 12:35 AM   #11
Badmoets
Member
 
Join Date: Feb 2016
Location: Fryslan, the Netherlands
Posts: 45
Default

Next thing to remove is the barrel. Two Allen screws on top of the reciever..


And the barrel comes loose.


Krale altered thetransfer port in the barrel. Seems like it`s a bit crude but it isn`t it works erfectly.


Getting the brass probe out took some time. Getting the end cap out took some time, i needed to be a bit creative. I did and got a small hammer and a longer screwdriver and tapped the end cap out.




Next thing was to remove the bolt.


And the probe came clean out.


The two pins that hold the trigger in its place is easily to be romoved. Mind the springs!


And you`ll get this.


And in the end you`ll get this.




Best regards!

Roel
Badmoets is offline   Reply With Quote
Old 08-20-2017, 12:38 AM   #12
Badmoets
Member
 
Join Date: Feb 2016
Location: Fryslan, the Netherlands
Posts: 45
Default

Hiya,

Here are a few groups i shot today. It still isn`t the best grouping i`ve ever had.










Best!

Roel
Badmoets is offline   Reply With Quote
Old 08-20-2017, 01:01 AM   #13
Airgun.Sniper
Member
 
Airgun.Sniper's Avatar
 
Join Date: Sep 2013
Location: Byron Ga
Posts: 98
Default

Its getting there Roel. What do you think will be your next thing to tackle?
__________________
Operator of JWOAdventures
Outdoorsman
Airgun.Sniper is offline   Reply With Quote
Old 08-20-2017, 01:41 PM   #14
Badmoets
Member
 
Join Date: Feb 2016
Location: Fryslan, the Netherlands
Posts: 45
Default

Hi,

i bought a Hatsan barrel and i`m gonna use it in the Kral. In my 'Koejak' project i`m using a Hatsan barrel too and that barrel groups great, 1 1/4 inch at 100 metres, so i`ve got some confidence Hatsan barrels. The Hatsan barrel needs some work so it will take some time...... But i`ll keep you guys posted.

Best, Roel
Badmoets is offline   Reply With Quote
Old 08-30-2017, 10:25 PM   #15
Airgun.Sniper
Member
 
Airgun.Sniper's Avatar
 
Join Date: Sep 2013
Location: Byron Ga
Posts: 98
Default

I think most don't take it off is probably warranty reasons. Or not enough know how or rather they are not mechanically inclined enough to do themselves.

Hopefully the groups shrink some Moets

Jay
__________________
Operator of JWOAdventures
Outdoorsman
Airgun.Sniper is offline   Reply With Quote
Old 08-31-2017, 10:14 PM   #16
Badmoets
Member
 
Join Date: Feb 2016
Location: Fryslan, the Netherlands
Posts: 45
Default

Hi,

thanks Jay. I hope so too. I went to the dirty, dark moist and sinister shooting range yesterday evening. It wasn`t moist yesterday. It was fokkin` wet! Look at this!


It`s been raining cats and dogs over here and it makes clear that the roof isn`t watertight. But we knew that.

I took along the HW97K to do some training for the next 100 meter springermatch and offcourse i took the Kral with me. Since i was on a 100 meter trackt i might as well try the Kral on the 100 meter track.

Waddayasay? Not half as bad as expected. I was mailing with Krale today. Richard told me there`s Kral barrels on the way to the Netherlands. When those barrels arrive we`ll see if there is a nice tight barrel for my Kral.


[url=https://postimg.org/image/xa8b1x5j1/]



I must say that the Puncher Pro is starting to shoot better everytime i use it. The custom parts are running in now and the gun starts to be fun to shoot......

Best regards, Roel

Last edited by Badmoets; 08-31-2017 at 10:16 PM..
Badmoets is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:24 PM.
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd. Copyright 2011 Airgunforums.org, All Rights Reserved