Air Gun Forums
Home | About Us | Contact Us
Quick Member Login:
Forgot password?
Forum Sponsors:
Left Advertisement

Forum Statistics:
Forum Members:
Total Threads:
Total Posts:

There are users
currently browsing forums.
You don't appear to be registered. Click here to register
Search the forums:
Old 07-03-2017, 07:25 PM   #1
Join Date: Feb 2016
Location: Fryslan, the Netherlands
Posts: 35
Default Kral Puncher Pro .25


i bought a second hand Kral Puncher Pro .25 on the Dutch airgunboard. The previous owner bought the gun last december at Krale over here in the Netherlands. I bought it for 300 or $340. Not too bad.

The Puncher Pro weighs some 3,8 kilo, the barrel measures some 23", the stock is made of Turkish wallnut and the magazine contains 10 shots.

I am impressed by the stock. Hardly i had a stock that fitted me better than this one. It`s welll made.

The left side of the breech.

The right side.

To be continued.....
Badmoets is offline   Reply With Quote
Old 07-03-2017, 07:34 PM   #2
Join Date: Feb 2016
Location: Fryslan, the Netherlands
Posts: 35

.... shooting the gun i got aware of the lousy muzzle velocity of the gun. 699 fps. That`s not enough for a .25 pellet to do some serious grouping. It was horrible. Four inch groups at 50 meter.

The transferport measured 3,3 mm. I took a drill and brought it to 4,2 mm.

Same goes for the powerwheel.

Putting more pressure on the hammerspring didn`t work. One turn of the adjustment bolt was the max, more than one turn and the gun wouldn`t get cocked. The hammer is hardened.

The short valve stemdoesn`t help to get the pellet going.

Very simple valvehousing. That`s great.

To be continued.........
Badmoets is offline   Reply With Quote
Old 07-04-2017, 01:30 AM   #3
grumpy's Avatar
Join Date: May 2010
Posts: 397

Very cool, Following along my friend
grumpy is offline   Reply With Quote
Old 07-06-2017, 08:47 PM   #4
Join Date: Feb 2016
Location: Fryslan, the Netherlands
Posts: 35

Hi Dave,

last scan was ok, next one is in september. We`ve got a great summer ahead of us.

Been jerking around with the Kral. I have made a new hammer for the gun with a M4 thread in it at the front. Since the valvestem is 5 mm in diameter the 4 mm pin on the hammer should open the valve further and longer. The original hammer has a 9,4 mm hole in it, the hammer spring is some 9 mm too so that fits pretty neat. The soft hammer spring doesn`t do the tric. The travel of the hammer is shortened through the 4 mm pin at the front side. So i made the hole in the hammer 10 mm, i had a hammer spring that stiffer. That did the trick. The V0 of the gun is now 867 fps.
The hammer.

Good enough to perform good at 50 meters you would say. Here are some groups at 50 meters.
this is at 1885 psi (130 bar)

This one is at 2030 ps1 (140 bar)

And these are at 2320 psi (160 bar)

This is the best group so far.

Gonna clean the barrel very securely tomorrow. See if that makes it a bit better.

Best, Badmoets
Badmoets is offline   Reply With Quote
Old 07-16-2017, 09:06 PM   #5
Join Date: Feb 2016
Location: Fryslan, the Netherlands
Posts: 35


with the latest hammer the cocking of the gun goes easier. like it oughta. I did some testing yesterday, i shoved a pellet through the barrel. It was obvious some lead scraped off of the pellet. Close inspection made clear that there was a tiny sharp edge around the transferport in the barrel.

This afternoon i spent some time getting that sharp edge out of the barrel. Waterproof sanding paper and some oil did the trick. When i shoved another pellet through the barrel i found out that with the 25 grain pellets the barrel is a bit wide, a bit too large in diameter so to say. The klands and grooves leave hardly any impression on the pellet.

I`ve been mailing with Krale, he`s the importer of Kral and he asked me to bring the gun back to his shop. He offered me to see if thare is a better barrel for the gun. I told him earlier that there was no warranty anymore for i bought the gun second hand and i`ve been working on the gun pretty much. He told me he didn`t mind.

I`ll see if i cabn find the time to go the Krale. I`ll keep ya guys posted.

Best, Roel
Badmoets is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 12:36 PM.
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd. Copyright 2011, All Rights Reserved